Tag Archives: 401

Back in the Saddle – Take care of your back

Ergonomics Part 1: (This post ended up far longer than I’d intended (yeah, shocking, I know!), so I will split it into 2, and offer you part 2 tomorrow.)

Lately, I’ve noticed that I hunch a lot when I sew.  This is on the longarm or at the domestic machines.   The result of this is that I “hurt” and I can’t sew for long periods of time.  So I thought I’d talk today a little about ergonomics, both at the stand up and sit down types of machines and your cutting table. Continue reading Back in the Saddle – Take care of your back

Greased Lightning – Singer motor lube in Canada

Update 06-30-2016:  The latest batch of Singer Lube I received from the supplier is no longer suitable for use in Singer motors.  As such, I’m recommending the use of Petroleum jelly.

People far smarter than me are recommending it and White Sewing machine motors of the same time period used it.

 

Over the last few months, I’ve been hearing that Singer Lube / Lubricant / Motor Lube (S2129)  is getting really hard to find, especially here in Canada. This has been my experience as a consumer as well.  Walmart used to carry it, but no longer.  I believe that it may have been at Fabricland at one point.  Also, no longer.  With the loss of the Singer store in Edmonton, there were no longer any options I was aware of in my area. Continue reading Greased Lightning – Singer motor lube in Canada

Bobbin’ Along – bobbin tension

You may have noticed in the previous post about tension that we didn’t even test sew the machine.

Yet.  We will test sew it, but not just yet.  You see what I’m trying to do is get the machine to a point where it’s in the ballpark first, then the rest is just small tweaks.  The goal is to help you rule out the big problems, the ones that require repair, or in drastic situations, possibly a trip to the sewing machine spa.

Consider this statement:

Tension too tight on the top can also be tension too loose on the bottom.
Top Tension too tight does not automatically mean bottom tension is too loose.
Tension too loose on the top can also be tension too tight on the bottom.
Top Tension too loose does not automatically mean bottom tension is too tight. Continue reading Bobbin’ Along – bobbin tension 

Fragile Tension – Tension does not have to equal stress (Updated with a video)

Possibly the most common reason a machine ends up on my bench is for tension.  Usually bird’s nests.  The thing is easily 80% of the time, there’s nothing really wrong with the machine that a repair person needs to look at it.  Sometimes it’s basic maintenance, sometimes it’s because someone told you at some point “DON’T YOU TOUCH THAT! EVER!”

I’m sure that the people who’ve said that meant well, but today I’m going to show you how to manage that dial properly and what to do when it’s not proper. Continue reading Fragile Tension – Tension does not have to equal stress (Updated with a video)

Sit yourself down!!! Slant-O-Matics: Bobbin Case placement

Sometimes you find yourself taking the bobbin case of a Slant-o-Matic out, maybe to remove an errant thread, clean the lint out or whatever.  Strangely, putting it back in isn’t as easy as taking it out.   Or maybe you thought it was good, but the machine’s locked up, or it just doesn’t look / feel right. Continue reading Sit yourself down!!! Slant-O-Matics: Bobbin Case placement